Course Type
Course Topic
Credit Hours
0.5
Cost
Members FREE
Non-Members $20
***SVU-CME version (for Sonographers/Technologists)***
Authors:
- Paul D. Bishop, PhD, RVT
- Thomas Fultz, RVT
- Lisa Smith, RVT
- Ryan S. Klatte, BS
- Francis Loth, PhD
- Sean P. Lyden, MD
First published March 11, 2020
Abstract:
Three-dimensional (3D) printing of anatomical structures has yielded valuable models for simulation, education, and surgical planning applications. Applications for 3D printing have continued to expand to include some ultrasound applications. The goal of this effort was to evaluate if a 3D printed model of a superficial femoral artery (SFA) would have realistic ultrasound characteristics. A computed tomography scan was 3D reconstructed and segmented using TeraRecon Aquarius Intuition software (TeraRecon, Foster City, California) to obtain an atherosclerotic SFA geometry. Both the lumen geometry and calcified plaque geometry of the SFA were exported as a stereolithographic (STL) file. The STL file was printed with An Object350 Connex 3D System using 2 different materials selected based on published elastic modulus data. VeroWhite was selected for the calcified plaque and TangoPlus Clear was selected for the artery wall. After printing, the SFA model was imaged in a water bath with a Phillips IU22 duplex ultrasound console and L12-9 ultrasound probe. Ultrasound imaging of the SFA model yielded grayscale views of artery geometry. Lumen geometry of the SFA model was similar to the actual artery geometry. Ultrasound was able to discern between the 3D print materials and visualize regions with stenosis. Suboptimal ultrasound parameters of echogenicity and wave velocity noted to differ from biological tissue. Total 3D print material cost was estimated at below $20. Although the 3D printed model did not have fully accurate ultrasound characteristics, it still provided realistic imaging. With further research, 3D printed models may offer a low-cost alternative for ultrasound phantoms.